How To Fix Water Damaged Bluetooth Headphones ? | Solved

Don't throw your bluetooth headphones just because they got water damaged. We provide you the the Guide "How To Fix Water Damaged Bluetooth Headphones" So that they don't go to waste.

How To Fix Water Damaged Bluetooth Headphones
Using headphones is a common thing in our daily life. We keep the headphones in our ears everywhere like when we goes to college or school, walking in the park and even in the swimming pool which are bad habits we developed, we should also give rest to our ears and think about them.

Water-Damage is the common issue which can happens with anyone. It can be happened due to sudden rain, dropped in a pool, or falling in mud. There could be any reason why they get wet and cause serious damage to your bluetooth headphones

What Happens When Your Bluetooth Headphones Get Wet ?

When your bluetooth headphones get wet, the impurities and the other minerals within the water causes the damage in your headphones.

Water is an excellent conductor of electricity, and when it comes into contact with your bluetooth headphones, it causes a direct connection between two points that are not meant to be connected, which leads to the short-circuit.

Corrosion is another problem, that can happen to your bluetooth headphones when they comes into the contact of water.

How To Fix Water Damaged Bluetooth Headphones

Corrosion is a natural process in which a material such as metal, changes its properties due to a chemical reaction with environment. Corrosion can be caused by exposure to water, air, chemicals, or other substances that can cause the material to react and break down. It is also known as Rust.

To prevent from corrosion, it is important to keep bluetooth headphones dry and protect them from moisture exposure. If the headphones do get wet, it is important to remove them from the water and let them dry completely before try to use them again.

What To Do When Headphones Get Water Damaged ?

If your Bluetooth headphones have been exposed to water, here are some steps you can take to try and save them:
  • Remove the headphones from the water immediately: The longer they stay in the water, the more damage they will likely incur.
  • Dry off the headphones: Use a soft cloth or tissue to gently wipe down the headphones and remove any excess moisture. Avoid using a hair dryer or other heat source, as this could cause further damage.
  • Place the headphones in a container of rice: Rice has the ability to absorb moisture and can help draw out any residual water that may have gotten into the device. Leave the headphones in the rice for at least 24 hours or longer, depending on the extent of the water damage.
  • Test the headphones: After the headphones have been in the rice for a sufficient amount of time, take them out and test them to see if they are working properly.

If the headphones do not work after being placed in rice, it may be necessary to consult a professional repair service or replace the headphones.

Important Note:- Keep in mind that these steps are not guaranteed to work and may not be effective for all cases of water damage. If your headphones are under warranty, you should check to see if the warranty covers water damage. If not, you may need to purchase a new pair of headphones.

What Not To Do When Headphones Get Water Damaged ?

When Bluetooth headphones get water damaged, it's important to avoid certain things that could further damage your device or reduce the chances of it working properly again. Here are some things to avoid doing if your Bluetooth headphones get wet:

  • Do not try to turn the headphones on or use them while they are still wet. This could cause a short-circuit and further damage the device.
  • Do not use a hair dryer or other heat-producing device to dry the headphones. The heat could cause damage to the internal components or cause the water to evaporate too quickly, which could result in corrosion.
  • Do not try to open the headphones and remove the battery. Doing so could cause further damage and void the warranty.
  • Do not use any chemicals or solvents to clean the headphones. This could cause additional damage or affect the performance of the device.
  • Do not place the headphones near a heat source, such as a radiator or direct sunlight, to dry them. This could cause the plastic components to warp or become fragile.

By avoiding these actions, it can help to reduce the risk of further damage to the headphones and improve the chances of them working properly again. If the headphones have been exposed to a significant amount of moisture or water, it may be necessary to consult a professional repair service or replace the headphones.

How To Fix Water Damaged Bluetooth Headphones ?

If you dropped your bluetooth headphones in water pool and want to fixed them by yourself. Then, do these following steps:
  1. Firstly, you have to be quick and dry it as soon as possible as it comes in contact with water. Because if there is water in them for a long time, then they can be damaged permanently.
  2. To dry, you can shake them to remove excess water and then, use a dry towel or a cotton to clear visible wetness.
  3. Remove the earpads and take apart the headphones. Many headphones can open easily without the help of any tools. However, some headphones are glued on or require a prying tool to open.
  4. Now take a container which is covered with a lid and fill it with distilled water. Then, put the opened part of the headphones in it and close the container with lid. Don't worry, distilled water is used to remove any impurities that may have accumulated in your headphones. Because it is non-conducting and non-corrosive.
  5. Then, shake the container gently for 5 minutes and remove the parts and dry them by shaking or blowing in them.
  6. Take an airtight container and put some silica gel packets in it or you can use uncooked rice instead of silica gel to dry up excess moisture from headphones. Then, put the parts inside the container and sealed it.
  7. Leave them to dry for 2-3 days. After it dries up completely, it is a possible that its charge is completely gone. So, plug in the headphones to charge it and then you can use it.


Ques:- Can water damage affect Bluetooth?

Ans:- Yes, water damage can affect the performance of Bluetooth. Bluetooth components are vulnerable to water damage, which can cause short-circuits and corrosion. This can lead to issues such as connectivity problems, audio issues, or complete failure of the Bluetooth device.

Ques:- Can Bluetooth headphones work after being washed?

Ans:- It depends on the amount of the water damage and the type of Bluetooth headphones. If the headphones have been thoroughly washed and dried, there is a chance they may still work. However, there may be some hidden damage which will cause problems after sometime.

If the headphones have been submerged in water for long period of time or exposed to a significant amount of moisture, it is unlikely that they will work properly again. In these cases, it is best option to consult a repair service or replace the headphones.

Ques:- Is Bluetooth blocked by water?

Ans:- Water can interfere with the transmission of Bluetooth signals, but it does not completely block them. Bluetooth operates in the 2.4GHz frequency band, which is affected by interference from water and other materials. 

This can cause decreased signal strength and connectivity issues, especially when the Bluetooth device is in close proximity to water or the signal has to pass through a substantial amount of water.

The effect of water on Bluetooth signals can vary depending on the frequency, wavelength, and power of the signal, as well as the temperature and conductivity of the water. 

For example, fresh water is a better conductor of electricity than salt water, which can affect the transmission of Bluetooth signals. In general, though, it's safe to say that water can reduce the effectiveness of Bluetooth signals, but it's not enough to completely block them.

"Have a Nice Day"

Next Post Previous Post
No Comment
Add Comment
comment url