How To Pair Skullcandy Jib Wireless Earbuds | Easy Guide
If you are a new member of the Skullcandy Jib wireless earbuds, you might be wondering how to pair them with your devices. Whether you want to use them with your smartphone, laptop, or tablet, the pairing process is simple and easy to follow. In this article, we'll guide you through the step-by-step process of how to pair skullcandy jib wireless earbuds and help you get the most out of your audio experience.
Now you can now listen to music or take phone calls through your Skullcandy Jib wireless earbuds.
Things to Keep in Mind Before Pairing
- Make sure that your skullcandy jib wireless earbuds are fully charged before pairing.
- Make sure that your earbuds are in pairing mode: To put your Skullcandy Jib Wireless Earbuds in pairing mode, press and hold the power button until the LED light on the earbuds flashes. This indicates that the earbuds are in pairing mode and are ready to be paired with your device.
- Make sure that your device and earbuds are within the range of each other. Bluetooth has a limited range, and if the distance between the devices is too far, you may have difficulty pairing them.
- Make sure that your device is compatible with your Skullcandy Jib Wireless Earbuds. Check the specifications of your device to ensure that it supports Bluetooth connectivity.
- After turning on the bluetooth mode in your devices, make sure you connect your devices within the 5 minutes. Otherwise they might be unable to discover each other.
- You can paired your skullcandy jib wireless earbuds with only one device at a time. To connect the new device, you must reset them.
How To Pair Skullcandy Jib Wireless Earbuds
You can pair your skullcandy jib wireless earbuds with your iPhones, android phones, Mac, or windows devices. So, follow the steps below to know how to pair skullcandy jib wireless earbuds.
Step # 1 Turn on your Skullcandy Jib Wireless Earbuds
To turn on your Skullcandy Jib wireless earbuds, you just have to remove them from their charging case and they will turn on automatically.
Step # 2 Put your Skullcandy Jib Wireless Earbuds on Pairing Mode
Put the earbuds into their charging case and don't close it. When the red LED light shows in both buds, remove them from the charging case. After that a blue LED light shows up that means your earbuds sync to each other and ready to paired with other devices.
Step # 3 Connect To Your Devices
- Turn on the Bluetooth feature on your device and search for available Bluetooth devices.
- Select "Skullcandy Jib" from the list of available Bluetooth devices.
- After that you can hear a voice "connected" that means they are connected to your device.
Now you can now listen to music or take phone calls through your Skullcandy Jib wireless earbuds.
How To Pair Skullcandy Jib Wireless Earbuds with iPhone
To connect your earbuds with iPhones follow the steps below:
- Place your earbuds within the range of your iPhone.
- Put your earbuds in pairing mode.
- Go to the setting on your iPhone > bluetooth.
- Turn on the bluetooth mode.
- From the list of available devices, choose the "Skullcandy Jib".
- Click to connect.
- You will hear a voice "connected".
How To Pair Skullcandy Jib Wireless Earbuds with Android Devices
To connect your earbuds with Android devices follow the steps below:
- Put your earbuds in pairing mode.
- Go to the setting > Bluetooth.
- Turn on bluetooth mode.
- Search for "Skullcandy Jib" under paired devices.
- Click on it to connect.
- After that you will hear a voice "connected".
How To Pair Skullcandy Jib Wireless Earbuds with Mac Devices
To connect your earbuds with Mac devices follow the steps below:
- Put your earbuds in pairing mode.
- Click on Apple icon > System Preferences.
- Click on bluetooth and turn it on.
- In available devices list, choose the "Skullcandy Jib".
- Click to connect.
- You will hear a voice "connected".
How To Pair Skullcandy Jib Wireless Earbuds with Windows Devices
To connect your earbuds with window devices follow the steps below:
- Click on "Start" Menu on left bottom side in your window devices.
- Search for bluetooth setting and turn it on.
- From the list of available devices, choose the "Skullcandy Jib".
- Click to connect.
- After that you will hear a voice "connected".
Read more:- How To Pair Sony WF-1000xm4
Skullcandy Jib wireless troubleshooting
If you're experiencing issues with your Skullcandy Jib Wireless earbuds, here are some basic troubleshooting steps you can try:- Make sure your earbuds are fully charged.
- Forget the Jib Wireless earbuds on your device, and then re-pair them again.
- Clean the earbuds and charging case with a soft, dry cloth.
- Reset the earbuds by holding the button on both earbuds for about 10 seconds.
- Check if the earbuds are compatible with your device and that the device is up to date.
- If you're still having issues, contact Skullcandy's customer support for further assistance.
How to Reset Skullcandy Jib Wireless Earbuds
If you are facing any kind of problem with your skullcandy jib wireless earbuds and want to reset them. So, follow the simple steps given below:
- To Reset, you have to disconnect your earbuds from paired devices.
- After that, turn off your earbuds by pressing the button on your both buds for 4 seconds.
- Then press the button for 10 seconds on your both buds.
- After it shows the red light, put them back in their charging case to complete the process of reset.
- Now, they are reset successfully.
Conclusion
In this article, we gave you the guideline on how to pair skullcandy jib wireless earbuds. The process is simple and similar in all devices. So the steps are:
- Turn on your earbuds
- Put them in pairing mode
- Go to the setting in your devices
- Then, turn on bluetooth mode
- Select the "Skullcandy Jib" from available devices list
- Click to connect
FAQ's
Ques:- How do you sync both earbuds together?
Ans:- To sync both Skullcandy Jib Wireless earbuds together, follow these steps:
- Put the earbuds into their charging case and don't close it.
- When the red LED light shows in both buds, remove them from the charging case.
- After that a blue LED light shows up that means your earbuds sync to each other and ready to paired with other devices.
Ques:- How do you put Skullcandy earbuds in pairing mode?
Ans:- To put your skullcandy earbuds in pairing mode, follow the steps:
- Make sure that your earbuds power is off
- To turn off, press and hold the power button for 3 seconds
- After it turns off, press and hold the power button for 5 seconds. Then, your earbuds enter in pairing mode.
Ques:- Why are my Skullcandy earbuds not pairing?
Ans:- If your Skullcandy earbuds are not pairing, there could be several reasons:
- Check if your device's Bluetooth is turned on.
- Verify that your device is compatible with your Skullcandy earbuds.
- Check if your earbuds are in pairing mode.
- Ensure that your earbuds are within the Bluetooth range of your device (typically around 33 feet or 10 meters).
- If you have previously paired your earbuds with another device, make sure they are not still connected to that device.
- Try to reset your skullcandy earbuds.
Ques:- How to reset skullcandy jib wireless headphones?
Ans:- If you are facing any kind of problem with your skullcandy jib wireless earbuds and want to reset them. So, follow the simple steps given below:
- To Reset, you have to disconnect your earbuds from paired devices.
- After that, turn off your earbuds by pressing the button on your both buds for 4 seconds.
- Then press the button for 10 seconds on your both buds.
- After it shows the red light, put them back in their charging case to complete the process of reset.
- Now, they are reset successfully.
"Have a Nice Day"